OverdriveNTool

Hi all
This application is for editing some parameters in the latest AMD OverdriveNext API supported GPUs (currently 290, 290x, 380, 380x, 390, 390x, Fury, Fury X, Nano, 4xx, 5xx series, Vega 56, Vega 64)
I’ve made this because WattTool has stopped working since driver 17.7.2.

Requirements:
System: Windows 7 or newer
GPU: AMD 290, 290x, 380, 380x, 390, 390x, Fury, Fury X, Nano, 4xx, 5xx series, Vega 56, Vega 64
Driver: 17.7.2 or newer

Command Line:
-p[gpu_id]”Name”
apply profile “Name” to GPU with id=[gpu_id] -c[gpu_id]”Name”
same as above, but with confirmation message that application started and everything went ok.
-r[gpu_id] reset GPU with id=[gpu_id] cp[gpu_id]”Name”
compare current values of GPU with id=[gpu_id] with profile “Name”, and eventually set this profile if not equal
cm[gpu_id]”Name”
compare current values of GPU with id=[gpu_id] with profile “Name”, and eventually set this profile if not equal, with additional message if not equal found
co[gpu_id]”Name”
only compare current values of GPU with id=[gpu_id] with profile “Name”, with message if not equal found
-consoleonly
displays all messages (eg. errors) in cmd.exe console window, instead of gui messages. Only commands that are put after -consoleonly are affected, example:
“OverdriveNTool.exe” -consoleonly -r0 -p0″1″ -r1 -p1″1″ -r2 -p2″2″ – will affect all commands
“OverdriveNTool.exe” -r0 -p0″1″ -r1 -consoleonly -p1″1″ -r2 -p2″2″ – will affect -p1″1″ -r2 -p2″2″ commands only

[gpu_id] – it’s the first number taken from GPU description, for single video card it’s 0
“Name” – name of the profile that was saved ealier, must be quoted if has spaces inside

example:
OverdriveNTool.exe -p0myProfile -p1″Profile 2″
In this example application starts without gui, then sets “myProfile” to GPU with id=0 and “Profile 2” to GPU with id=1 and then exit.

commands can be used all together, for example:
OverdriveNTool.exe -p0myProfile -r0 co1″Profile 1″
On configs with more than 10 GPUs [gpu_id] must have 2 digits, for GPUs 0-9 leading 0 must be added, example: 00,01,02,03,04,05,06,07,08,09,10,11,12. Usage example: -p05″Name”
It’s possible to use * as [gpu_id], which means it affects all supported GPUs, example:
-r* -p*MyProfile -p2″Custom profile” cm*MyProfile

Advanced:
-ac[gpu_id] GPU_P[num]=[value];[value][;0] Mem_P[num]=[value];[value][;0] Fan_Min=[value] Fan_Max=[value] Fan_Target=[value] Fan_Acoustic=[value] Power_Temp=[value] Power_Target=[value] -ac is similar to -p command, applies values but without using profiles. Format is identical to ini profile. All not specified values will remain untouched. Can be used with other commands (-consoleonly, * as [gpu_id], -r, -p… etc.)
[num] – Pstate number, using # as [num] will apply to highest available Pstate for scpecified GPU
[value] – value, for GPU and memory PState first value is clock (MHz), second is voltage (mV), third optional ;0 makes this Pstate disabled.
Putting * as Memory or GPU value will skip applying this value, for example:
-ac0 GPU_P7=*;800 Mem_P3=1000;* (only applies GPU_P7 voltage=800mV and Memory P3 clock=1000MHZ)
-ac0 GPU_P4=*;*;0 (only disables GPU_P4 without changing it’s values)

For I2C settings use –ac with Offset=[value] LLC=[value] PhaseGain=[value] CurrentScale=[value] I2C must be enabled and supported for specified GPU, otherwise it will not work. Offset value is multiplied by 6,25mV, so 10 = +62,5mV, -5 = -31,25mV
Example:
-ac0 Offset=10 LLC=0
-ac0 Offset=-5 LLC=1 PhaseGain=000000 CurrentScale=60

Commands example:
-ac0 GPU_P7=1200;800 Mem_P2=1000;850 Fan_Min=1080 Fan_Max=1700 Fan_Target=70 Fan_Acoustic=700 Power_Temp=90 Power_Target=50 -ac1 GPU_P#=1200;800 Mem_P#=1000;850
-ac0 GPU_P7=1200;800;0 Mem_P3=1000;850 Fan_Min=1080 Fan_Max=1700
-consoleonly -r5 -ac5 GPU_P#=1200;800 Mem_P#=1000;850 Fan_Min=1080 Fan_Max=1700 -ac4 Fan_Target=70 Fan_Acoustic=700 Power_Temp=90 Power_Target=50
-ac* Power_Target=-1 GPU_P7=*;*;0
-r0 -ac0 GPU_P7=1200;800 Mem_P1=700;850;0 Mem_P2=750;850;0 Mem_P3=800;850;0 Mem_P4=1000;850 Fan_Min=1080 Fan_Max=1700 Fan_Target=70 Fan_Acoustic=700 Power_Temp=90 Power_Target=50
-ac0 Power_Target=50 -ac1 Power_Target=-50 -ac2 Fan_Max=1700 Fan_Min=1080 -ac1 Fan_Acoustic=700

-getcurrent – prints current values for all supported GPUs in cmd console window.

Additional info:
-Workaround for bug in 17.7.2 drivers, when driver sometimes uses default voltages instead of user settings: use reset and re-apply profile.
-It’s possible to disable/enable each P state. To do this click on P0, P1.. etc. label. If P state is disabled it will not be used by GPU.
-I2C currently supports: IR3567B (RX470, RX480, some RX5xx), up9505 (MSI RX5xx)
-If you prefer to not touch fan settings it’s possible to deactivate Fan section for each GPU. To do this press Ctrl + double click somewhere on the Fan box. It’s saved per gpu_id, so GUI or commandline will not touch fan settings for such GPU.
-To open Settings or SoftPowerPlayTable editor left click on top-left program icon, or right click on the titlebar.
-To change “friendly name” first enable it in settings, than right click on the gpu list to open menu

Current version: 0.2.6 (16.05.2018)
Filename: OverdriveNTool.exe
MD5: 64C83C28CCA53183760B224651EFF69E
SHA-1: 645088005115AE317BC9646E110C43A767CFECAA

Download:
drive.google.com
or mirror: zippyshare.com
or mirror: dropbox.com

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

بدلیل نوسانات شدید قیمت عرض، برای خرید تعداد بالا تماس بگیرید. رد کردن